PTFE Encapsulated O-Ring Encapsulated o rings FPM FKM Silicone Rubber O-Rings
1.The O-ring is an annular seal having an O-shaped cross section, the size of which is determined by the inner diameter ID and the wire diameter CS.
2.O-ring size calculation: outer diameter = inner diameter + 2 x wire diameter (OD = ID + 2x CS).
3.The purpose of using O-ring seals is to prevent leakage and loss of liquids or gases.
4.O-rings are the most commonly used type of seal because of their simplicity, convenience, and small installation space. As long as the groove design and material selection are correct, and the operating conditions are within the temperature range of the rubber material, the seal can have a long-term sealing effect in the static or dynamic seal.
PTFE Encapsulated O-Ring Encapsulated o rings FPM FKM Silicone Rubber O-Rings
FKM/FPM O RINGS
*Service Temperature
-20°C to 200°C
*Application
Fluoroelastomers provide additional heat and chemical resistance.Viton is used because it has a lower probability of catching fire, even with the increased percentages of oxygen found in nitrox. It is also less susceptible to decay under increased oxygen conditions.
PTFE Encapsulated O-Ring Encapsulated o rings FPM FKM Silicone Rubber O-Rings
PTFE Encapsulated O-Ring Encapsulated o rings FPM FKM Silicone Rubber O-Rings
PTFE Encapsulated O-Ring Encapsulated o rings FPM FKM Silicone Rubber O-Rings
PTFE Encapsulated O-Ring Encapsulated o rings FPM FKM Silicone Rubber O-Rings
Plastic bag inner packing, cartons box outer packing.
Packed in wooden cases wrapped in plastic bags.
Or we can pack it according to your requirement.
PTFE Encapsulated O-Ring Encapsulated o rings FPM FKM Silicone Rubber O-Rings
1. Q: What is our advantage products?
A: Our core products are Customized Rubber Seals and Rubber Gaskets and PU Seals etc.
2. Q: What is our main product range?
A: Unilutek is professional on making any size & shape of rubber seals including Standard sizes and Nonstandard sizes,Such as O-Rings, Oil Seals, Hydraulic Seals, Flat Gasket, Customized Seals and Gaskets etc.
3. Q: Which types of material can we produce?
A: NBR, FKM, Silicone, EPDM, HNBR, CR, PEEK, PTFE, PU, FFKM, ACM and Aflas etc.
4. Q: Which information do we need to know for your offer?
A: Product Name with the Type, Material, Dimension(Or Drawing), Quantity
5. Q: What is the packaging on the goods?
A: Goods pasted with the label is usually packed with PP bag inside and Carton Box outside.
Special package can be made according to the requirement.
Audited Supplier 
){kind=link}
){kind=link}